Manual gripper Series SN range 0.14-1.5mmq (26-16 AWG)

SN-48B Ratchet Terminal Crimp Tool is used for DuPont and jst-sm Molex connectors and pins.
For 3.96 / 4.8 / 5.08.6.3mm grounding terminal connectors.

This crimping tool can be used to crimp male and female crimp pins to 16-26 AWG wire to make custom wire.
The tool offers ratchet action for added texture and ease of use.

Using the crimp tool:
- Hold the tool with your left hand with the writing visible and facing you, but upside down.
- Place the connector in one of the three slots and the "wings" are facing downwards.
- Close the tool slightly until the ratchet engages and grasps the connector.
- Tighten the ratchet and it will open after this step. The connector should have been properly crimped onto the wire.

Specifications:
- Model Number: SN-48B
- Material: high carbon steel
- Crimping capacity: 0.14-1.5mm2
- AWG: 26-16 AWG
- Length: 190mm / 7.5in
- Weight: 0.35kg / 0.8lbs
- Awg: 26-16
- Material: high carbon steel
- Crimping Capacity: 0.14-1.5M
- Used for Molex DuPont and jst-sm connectors and pins
- For 3.96 / 4.8 / 5.08 / 6.3mm ground terminal connectors